联系我们

您所在的位置:首 页>>产品展示
  • 产品名称:挤出专用温控单元
  • 产品类别:挤出专用温控单元

产品说明

挤出专用温控单元
Special Temperature Control Unit for Extrusion
特 点FEATURES
管路防爆装置
吹气回水功能(选购)
回水温度显示表
开机自动排气功能
加热功率切换功能
即时冷却关机功能
隔离式电器控制箱. 延长电器使用年限
RS485通讯功能,实现自动化管理.(选购)
热水BY-PASS泄压回路
多点温度控制机组可订作
水泵马力和加热功率可订作
电器采用OMRON. FUJI. TE. LG. MOELLER. ABB. WEST.
温度控制范围: 进水温+15℃→120℃
304不锈钢一体管路,减少管阻及锈垢
控制方式: 采用进口微电脑或(选购)PLC控制
安全保护完善,故障显示, 维修.保养无需专业人员
Explosion-proof equipment for pipelines
Air blowing and return water function (optional)
Thermometer for return water
Automatic air-exhausting function after startup
Switchover of heating power
Instant cooling return oil shut-down function
Isolated electric box for longer services lives of electric appliances
RS485 communication function for automated management (optional)
BY-PASS pressure release loop for hot water
Customizable multi-point temperature control unit
Customizable horsepower and heating power of oil pump
Brands OMRON, FUJI, TE, LG, MOELLER, ABB and WEST for electric appliances
Range of temperature control: +15→120 for incoming water
304 stainless steel integrated pipelines for less pipe resistance and rust
Control mode: imported microcomputer or PLC (optional)
Perfect safety protection, fault display, easy repair and maintenance even without professionals
机器规格

模型 单位 AEX-05 AEX-10 AEX-20 AEXT-10 AEXF-10
温控范围 120℃
温控精度 ±1℃
电源   AC3∮380V 50HZ3P+E(5M)
传热媒体  
冷却方式   直接冷却(间接冷却可订制)
加热能量 KW 3 4 9 4x3 4x4
泵浦马力 HP 0.5 1 2 1x3 1x4
泵浦工作流量 L/MIN 35 100 180 100 100
泵浦工作压力 Kg/CM2 2 2.2 2.4 2.2 2.2
最大电力消耗 KW 4 5 11 21 28
警报功能   缺相/缺水/超温/过载/反转
冷却水配管 INCH  1/2  1/2  1/2  3/4 1   
循环水配管 INCH  1/2  3/4 1    3/4x3 3/4x4
外型尺寸 MM 520x260x530 525x260x530 800x325x640 800x600x1000 800x600x1100
重量 Kg 40 40 75 110 150
以上规格如有变更,恕不另行通知,特殊规格可另行设计制造.


网络营销
 
最小化
0755-33232001

深圳奥德

奥德客服

苏州奥德

进入商铺